Kodi Z-Wave ndi chiyani?

Z-Wave ndiye protocol yapadziko lonse lapansi yopanda zingwe yolumikizirana mu Smart Home. Izi
chipangizo ndi choyenera kugwiritsidwa ntchito m'chigawo chotchulidwa mu Quickstart gawo.

Z-Wave imathandizira kulumikizana kodalirika ndikutsimikiziranso uthenga uliwonse (njira ziwiri
kulankhulana) ndipo node iliyonse yoyendetsedwa ndi mains imatha kukhala ngati yobwereza ma node ena
(maukonde meshed) ngati wolandilayo sakhala pagulu lachindunji lopanda zingwe
transmitter.

Chida ichi ndi china chilichonse chotsimikizika cha Z-Wave chitha kukhala kugwiritsidwa ntchito pamodzi ndi zina zilizonse
chida chotsimikizika cha Z-Wave mosasamala mtundu ndi komwe adachokera bola zonse zili zoyenera kwa
ma frequency osiyanasiyana.

Ngati chipangizo chikuthandizira kulankhulana motetezeka idzalumikizana ndi zida zina
otetezeka malinga ngati chipangizochi chikupereka chimodzimodzi kapena mlingo wapamwamba wa chitetezo.
Kupanda kutero izo zidzasintha kukhala m'munsi mlingo wa chitetezo kusunga
kuyanjana mmbuyo.

Kuti mumve zambiri zaukadaulo wa Z-Wave, zida, mapepala oyera ndi zina zambiri chonde onani
ku www.z-wave.info.

Mafotokozedwe Akatundu

The Z-Wave sensor is equipped with Z-Wave500 series main control chip. It is a passive infrared intrusion sensor that adopts Energy Integration Logical Processing, Random Dynamic Time Segmentation & Digital Signal Processing Technologies. With precise columnar Fresnel lens, it can increase its energy receiving efficiency and sensitivity without false alarm. In conjunction with advanced software technology, it will make an accurate judgement between real intruder & interference factors that may cause false alarm. Superior ability to detect & prevent false positives. The pulse number is optional, suitable for kinds of residential constructions, preventing false positive & false negative that other ordinary indoor sensors cannot do. Its performance is far beyond other ordinary PIR alarms. Besides, we use large capacity built-in battery & special power saving solution, battery working life is up to 3 years.

Konzekerani Kuyika / Kukonzanso

Chonde werengani bukuli musanagwiritse ntchito.

Pofuna kuphatikiza (kuwonjezera) chida cha Z-Wave pa netiweki ziyenera kukhala zokhazikika mufakitale
boma. Chonde onetsetsani kuti mwakhazikitsanso chipangizochi kuti chikhale chokhazikika chafakitale. Mutha kuchita izi
pochita ntchito yopatula monga momwe tafotokozera m'bukuli. Aliyense Z-Wave
Wolamulira amatha kuchita izi koma akulimbikitsidwa kugwiritsa ntchito choyambirira
wolamulira wa netiweki yapitayi kuti atsimikizire kuti chipangizocho sichikuphatikizidwa bwino
kuchokera pa netiweki iyi.

Kuphatikiza / Kuchotsa

Pachikhazikitso cha fakitale chipangizocho sichikhala pa netiweki iliyonse ya Z-Wave. Chipangizocho chikufunika
kukhala yowonjezeredwa pa netiweki yopanda zingwe kulumikizana ndi zida za netiweki iyi.
Izi zimatchedwa kulolerana.

Zipangizo zingathenso kuchotsedwa pa netiweki. Izi zimatchedwa Kupatula.
Njira zonsezi zimayambitsidwa ndi woyang'anira wamkulu wa netiweki ya Z-Wave. Izi
controller imasinthidwa kukhala njira yochotseramo. Kuphatikizika ndi Kupatula ndi
ndiye anachita kuchita yapadera Buku kanthu pa chipangizo.

Vuto lofulumira kuwombera

Nawa malingaliro ochepa pakukhazikitsa ma netiweki ngati zinthu sizigwira ntchito monga zikuyembekezeredwa.

1. Onetsetsani kuti chipangizocho chili m'malo osintha mafakitale musanaphatikizepo. Mosakayikira phatikizani kale kuphatikiza.
2. Ngati kuphatikiza sikulephera, onani ngati zida zonse ziwiri zimagwiritsa ntchito pafupipafupi chimodzimodzi.
3. Chotsani zida zonse zakufa kumayanjano. Kupanda kutero mudzawona kuchedwa kwakukulu.
4. Musagwiritse ntchito mabatire ogona opanda wowongolera wapakati.
5. Osasankha zida za FLIRS.
6. Onetsetsani kuti muli ndi zida zamagetsi zokwanira kuti mupindule ndi meshing

Chiyanjano - chipangizo chimodzi chimayang'anira chipangizo china

Z-Wave zida zimayang'anira zida zina za Z-Wave. Mgwirizano pakati pa chipangizo chimodzi
kulamulira chipangizo china kumatchedwa mayanjano. Kuti azilamulira zosiyana
chipangizo, chipangizo chowongolera chiyenera kusunga mndandanda wa zipangizo zomwe zidzalandira
kulamulira malamulo. Mindandanda iyi imatchedwa magulu agulu ndipo amakhala nthawi zonse
zokhudzana ndi zochitika zina (mwachitsanzo, kukanikiza batani, zoyambitsa sensa, ...). Kuti mwina
chochitika chikuchitika zipangizo zonse zosungidwa mu gulu gulu adzakhala
landirani lamulo lomwelo lopanda zingwe, lomwe ndi lamulo la 'Basic Set'.

Magulu Ogwirizana:

Gulu NumberMaximum NodesDescript

1	1	It will send NOTIFICATION_REPORTto the device in Lifeline group when the PIR sensor is triggered/ recovered , tamper switch is triggered / recovered. When in low battery status, PIR sensor will send BATTERY_REPORT to Lifeline group device periodically.The PIR sensor will send. DEVICE_RESET_LOCALLY_NOTIFICATION to Lifeline group device when the device recovers to factory settings.
2	2	When the PIR sensor is triggered, it will send BASIC SET command to control these devices in Group2.

Ma Parameters Osintha

Zogulitsa za Z-Wave zikuyenera kugwira ntchito m'bokosi pambuyo pophatikizidwa, komabe
masinthidwe ena amatha kusintha magwiridwe antchitowo kuti agwirizane ndi zosowa za ogwiritsa ntchito kapena kutsegulanso
zowonjezera mbali.

CHOFUNIKA KUDZIWA: Owongolera atha kuloleza kusanja
mfundo zosainidwa. Kuti muyike zikhalidwe mu 128 ... 255 mtengo womwe watumizidwa
ntchitoyo idzakhala mtengo wofunidwa kuchotsera 256. Mwachitsanzoample: Kupanga a
parameter to 200  pangafunike kukhazikitsa mtengo wa 200 kuchotsera 256 = kuchotsa 56.
Pakakhala mtengo wa ma byte awiri malingaliro omwewo amagwiranso ntchito: Makhalidwe apamwamba kuposa 32768 akhoza
zinafunikanso kuperekedwa ngati makhalidwe oipa.

Parameter 1: Basic Set

If there is any device under Association Group2, the PIR sensor will send Basic Set = value command to control that device when the PIR sensor is alarm.
Kukula: 1 Byte, Mtengo Wosintha: 255

SettingDescript

1 - 100	Decimalism 1-100,Used for quantitative control of other z-wave devices, like adjusting the brightness of lights.
255	Decimalism 255,To control other devices that only receive basic set value = 0xff.

Parameter 2: Turn Off Light Time Configuration

If there is any device under Association Group2, the PIR sensor will send Basic Set = value command to Group2, and send Basic Set = 0x00 command to turn-off light after 5 x t seconds.
Kukula: 1 Byte, Mtengo Wosintha: 4

SettingDescript

1 - 24

Decimalism 1-24,To control the time to turn off the lights.The basic step value of time is 5 seconds.If the value is set to 4,start timing when the lights are turned on,turn off the lights after 4*5 seconds =20 seconds

Parameter 3: PIR Sensor Alarm Elimination Time Configuration

Min set time is 5s. If the configuration is 1, that means it will eliminate alarm after 5 seconds, if t, will eliminate alarm after 5 x t seconds.
Kukula: 1 Byte, Mtengo Wosintha: 4

SettingDescript

1 - 24

Decimalism 1-24,Used to set to send the eliminate alarm time after PIR alarm.The basic step value of time is 5 seconds,If the value is set to 4,send the eliminate alarm message after alarm 4 * 5 seconds = 20 seconds

Data luso

Zida Zapulogalamu	ZM5202
Mtundu wa Chipangizo	SENSOR YOPEREKA
Kugwiritsa Ntchito Network	Kunena Kapolo Wogona
Mtundu wa Firmware	HW: 255 FW: 5.36
Mtundu wa Z-Wave	6.51.09
Chizindikiritso	ZC10-19076690
Chizindikiro Cha Z-Wave	0x0214.0x0005.0x0003
Mitundu Yazidziwitso Yothandizira	Chitetezo Panyumba
masensa	Kusuntha / Palibe Kusuntha (Binary)
pafupipafupi	XX pafupipafupi
Zolemba malire mphamvu HIV	Wolemba

Makalasi Othandizira Othandizidwa

• Zambiri za Grp
• Mgwirizano V2
• Battery
• kasinthidwe
• Chida Chokhazikitsirani Kumaloko
• Wopanga Wapadera V2
• Chidziwitso V4
• Mphamvu
• Sensor Binary V2
• V2
• Dzukani V2
• Zwaveplus Info V2

Makalasi Olamulidwa Olamulidwa

• Basic

Kufotokozera kwa mawu apadera a Z-Wave

• Mtsogoleri - ndi chipangizo cha Z-Wave chomwe chimatha kuyang'anira maukonde.
  Owongolera nthawi zambiri amakhala Zipata, Zowongolera Zakutali kapena zowongolera khoma zoyendetsedwa ndi batri.
• Kapolo - ndi chipangizo cha Z-Wave chopanda mphamvu zowongolera maukonde.
  Akapolo amatha kukhala masensa, ma actuators komanso owongolera akutali.
• Pulayimale Woyang'anira - ndiye wotsogolera wapakati pa intaneti. Izo ziyenera kukhala
  wolamulira. Pakhoza kukhala wolamulira m'modzi yekha mu netiweki ya Z-Wave.
• kulolerana - ndiyo njira yowonjezera zida zatsopano za Z-Wave mu netiweki.
• Kupatula - ndiyo njira yochotsera zida za Z-Wave pa netiweki.
• Msonkhano - ndi mgwirizano wowongolera pakati pa chipangizo chowongolera ndi
  chipangizo cholamulidwa.
• Chidziwitso cha Wakeup - ndi uthenga wapadera wopanda zingwe woperekedwa ndi Z-Wave
  chipangizo kulengeza kuti amatha kulankhula.
• Chidziwitso Chachidziwitso - ndi uthenga wapadera wopanda zingwe woperekedwa ndi a
  Chipangizo cha Z-Wave kuti chilengeze kuthekera kwake ndi ntchito zake.