innovair IA60002 Remote Control User Manual

innovair IA60002 Remote Control User Manual

Wowongolera kutali

innovair IA60002 Remote Control User Manual - Remote controller

  • 1. The remote controller transmits signals to the system.
    ONSE / PA batani
    Chipangizocho chidzayambika chikapatsidwa mphamvu kapena chidzayimitsidwa pamene chikugwira ntchito, mukasindikiza batani ili.
  • 2. BATANI LAMODZI
    Dinani batani ili kuti musankhe mawonekedwe opangira.
  • 3. BATANI YOTSATIRA
    Used to select fan speed in sequence auto, higher, high, medium, low or lower.
  • 4,5. ROOM TEMPERATURE SETTING BUTTONS
    Amagwiritsidwa ntchito kusintha kutentha kwa chipinda ndi chowerengera, komanso nthawi yeniyeni.
  • 6. SMART BUTTON
    Amagwiritsidwa ntchito polowetsa logic yosamveka mwachindunji, mosasamala kanthu kuti chipangizocho chayatsidwa kapena kuzimitsa.
  • 7. BATANI LOGONA
    Amagwiritsidwa ntchito kukhazikitsa kapena kuletsa ntchito ya Sleep Mode.
  • 8. BATANI YOTSANUKA
    Amagwiritsidwa ntchito kuyimitsa kapena kuyambitsa kugwedezeka kosunthika kosunthika ndikuyika komwe mukufuna kupita mmwamba/pansi.
  • 9. IFEEL BUTTON
    Amagwiritsidwa ntchito kukhazikitsa mawonekedwe a IFEEL. Dinani kamodzi, ntchito ya IFEEL idzayambika. Dinani kachiwiri, ntchito ya IFEEL idzatsekedwa.
  • 10. CLOCK BUTTON
    Amagwiritsidwa ntchito kuyika nthawi yomwe ilipo.
  • 11,12. TIMER ON/OFF BUTTON
    Amagwiritsidwa ntchito kukhazikitsa kapena kuletsa ntchito yowerengera nthawi.
  • 13. SUPER BUTTON
    Used to start or stop the fast cooling/heating. (Fast cooling operates at high fan speed with 61 °F(16°C) set temp automatically ; Fast heating operates at auto fan speed with 86°F(30°C) set temp automatically.)
  • 14. DIMMER BATANI
    Mukadina batani ili, mawonekedwe onse amkati amkati adzatsekedwa. Dinani batani lililonse kuti muyambitsenso mawonekedwe.
  • 15. BATANI YOTSANUKA
    Used to stop or start Horizontal adjustment louver swinging and set the desired left right airflow direction.
  • 16. BATANI WOTHETSA
    Used to stop or start MUTE Mode operation. Fan speed is automatically set at lower fan speed.
  • 17. 8° HEAT BUTTON
    Used to set 8° heating mode.

Zizindikiro pa LCD:

innovair IA60002 Remote Control User Manual - Indication symbols on LCD

Malangizo ogwiritsa ntchito

  • Momwe Mungayikitsire Mabatire
    Chotsani chivundikiro cha batri molingana ndi njira ya muvi.
    Lowetsani mabatire atsopano kuonetsetsa kuti (+) ndi(-) ya batire akugwirizana bwino.
    Lumikizaninso chivundikirocho pochikankhira kumbuyo.
    Zindikirani:
  • Gwiritsani ntchito mabatire a 2 LR03 AAA(1.5volt). Osagwiritsa ntchito mabatire omwe amatha kuchajwanso.
    Sinthani mabatire ndi atsopano amtundu womwewo pomwe chiwonetsero chazimiririka.

innovair IA60002 Remote Control User Manual - How to Insert the Batteries

  • Kusunga ndi Malangizo Ogwiritsira Ntchito Mtsogoleri Wautali
    Mtsogoleri wakutali akhoza kusungidwa wokwera pakhoma ndi chosungira.
    Chidziwitso: Chogwirizira chowongolera kutali ndi gawo lomwe mwasankha.

innovair IA60002 Remote Control User Manual - Storage and Tips for using the Remote Controller

  • Mmene Mungagwiritse Ntchito
    Kuti mugwiritse ntchito mpweya wofikira m'chipindacho, yesetsani wolamulira wakutali kuti alandire cholandilira. Wolamulira wakutali azigwiritsa ntchito chowongolera mpweya patali mpaka 7m pomwe akuloza chizindikiro cholandirira chipinda chamkati.

innovair IA60002 Remote Control User Manual - How to use

⚠ CAUTIONS
Kuti mugwiritse ntchito ma siginolo oyenera pakati pa oyang'anira akutali ndi chipinda chamkati, sungani wolandirayo kuti achoke pazinthu zotsatirazi:
• Kuwala kwa dzuwa kapena magetsi ena amphamvu kapena kutentha
• Flat panel television screen or other electrical appliances that react to the remote controller Additionally, the air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit. If the signal may not be transmitted properly, either move these materials or consult your local dealer.

Njira zogwiritsira ntchito

innovair IA60002 Remote Control User Manual - Operation modes

Note: Press and hold “MODE” button and ” G ” button together for 3 seconds will alternate the temperature display between the °C and °F scale.
Zindikirani: Kutenthetsa sikukupezeka pamitundu yozizirira yokha.
Note: At “Dry” mode, the unit can decrease or rise 7″F by remote controller if you feel uncomfortable.

Press  button, when the appliance receives the signal, the RUN indicator of the indoor unit lights up.

SWING, SMART, TIMER ON, TIMER OFF, CLOCK, 8° HEATING, SLEEP and SUPER operation modes will be specified in the following pages.

  • Changing modes during operation, sometimes the unit does not response at once. Wail 3 minutes.
  • During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will be discharged until temperature of indoor heat exchanger rises .
  • Dikirani mphindi zitatu musanayambitsenso chipangizocho.

Kuwongolera mayendedwe a Airflow

innovair IA60002 Remote Control User Manual - Airflow direction controlinnovair IA60002 Remote Control User Manual - Airflow direction control

NOTE: lf the unit doesn’t have four ways airflow function, you can adjust horizontal airflow by yourself.

Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the
unit first and cut off the power supply, then restore power supply again.
Ndibwino kuti musalole chowongolera choyimirira kuti chipendeke pansi kwa nthawi yayitali pa COOLING kapena DRY mode kuteteza madzi opindika kuti asadonthe.

SMART mode

Press the SMART button, the unit enters SMART mode(fuzzy logic operation) directly regardless of the unit is on or off. In this mode, temperature and fan speed are automatically set based on the actual room temperature.

innovair IA60002 Remote Control User Manual - Smart modeinnovair IA60002 Remote Control User Manual - Smart mode

TIMER mawonekedwe

It is convenient to set the timer on with TIMER ON/OFF buttons when you go out in the morning to achieve a comfortable room temperature when you get home. You can also set the timer off at night to enjoy a good sleep.

► How to set the TIMER ON

Batani la TIMER ON lingagwiritsidwe ntchito kukhazikitsa chowerengera kuti chiyatse chipangizocho panthawi yomwe mukufuna.

i) Press the TIMER ON button and when “ON 12:00” flashes on the LCD display, you can then press the 0 or 0 buttons to select the time you wish for the appliance to turn on.

innovair IA60002 Remote Control User Manual - How to set the TIMER On

Press the 0 or 0 button once to increase or decrease the time setting by 1 minute.
Press the 0 or 0 button 2 seconds to increase or decrease the time setting by 10 minutes.
Press the 0 or 0 button for a longer time to increase or decrease the time by 1 hour.

Zindikirani: Ngati simuyika nthawi mumasekondi 10 mutatha kukanikiza batani la TIMER ON, chiwongolero chakutali chidzatuluka mu TIMER ON mode basi.

ii) When your desired time is displayed on the LCD, press the TIMER ON button and confirm it.
A “beep” will sound. “ON” stops flashing.
Chizindikiro cha TIMER pagawo lamkati chimayatsa.
iii) After the set timer is displayed for 5 seconds the clock will be displayed on the LCD of the remote control.

► Momwe mungaletsere TIMER ON
Press the TIMER ON button again. Once you hear a “beep” and the indicator disappears, the TIMER ON mode has been canceled.
Note: It is similar to set TIMER OFF. You can make the appliance switch off automatically at your desired time.

8 ° KUCHULUKA mode

• 8°HEAT button is used to set 8°C heating mode.
In 8°HEATING mode, the fan speed is set at “AUTO” automatically.
• The 8°HEATING mode will be started when you press 8°HEAT button at the heating mode.
■ If you press any button except for TIMER ON, TIMER OFF, CLOCK, IFEEL and SWING button, you can escape from 8°HEATING mode. Then the display a· will disappear and the 8°HEATING mode will be cancelled.

Zindikirani:
In 8°HEATING mode, the default temperature is set 8°C.
8°HEATING mode can be set only when the air conditioner works in the heating mode.

innovair IA60002 Remote Control User Manual - 8Heating mode

SUPER mode

■ SUPER mode is used to start or stop fast cooling or heating. In SUPER mode, the super indicator @ will display on LCD.
Fast cooling operates at high fan speed, changing the set temperature automatically to 61 °F(16°C); Fast heating operates at auto fan speed, changing the set temperature automatically to 86 °F(30°C).
• SUPER mode can be set when the appliance is in operation or energized.
■ In SUPER mode, you can set temperature, airflow direction or timer. If you want to escape from SUPER mode, press SUPER, MODE, FAN, ON/OFF or SLEEP button, the display will return to the original mode.

Zindikirani:

  • SMART button is not available in SUPER mode.
  • The Appliance will continue working in SUPER mode , if you don’t escape from it by pressing any of the buttons mentioned above.
  • Kutenthetsa SIKUDZIWA paziziziritsa mpweya wokha.
  • For the first generation of products, you can’t set temperature in super mode, but you can press TEMPERATURE SETTING button to escape super mode.

MALO OGONA

SLEEP mode can be set in COOLING ,HEATING or DRYING mode. This function gives you a more comfortable environment for sleep.
• The appliance will stop operation automatically after operating for 8 hours.
■ Fan speed is automatically set at low speed. Each time SLEEP button is pressed, the operation mode is changed in sequence:
SLEEP 1 ____. SLEEP 2 ____. SLEEP 3 ____. SLEEP 4 ____. QUIT SLEEP MODE

innovair IA60002 Remote Control User Manual - Sleep mode

TULO mode 1:
■ Set temperature will rise by 2°F(2°C) at most if the appliance operates in cooling mod for 2 hours constantly, then keeps steady.
■ Set temperature will decrease by 2°F(2°C) at most if the appliance operates in heating mode for 2 hours constantly, then keeps steady.

TULO mode 2:
■ Set temperature will rise by 2°F(2°C) if the appliance operates in cooling mode for 2 hour constantly, decrease by 1 °F(1 °C) after 6 hours, then decrease by 1 °F(1 °C) after 7 hours.
• Set temperature will decrease by 2°F(2°C) if the appliance operates in heating mode for hours constantly, rise by 1 °F(1 °C) after 6 hours, then rise by 1 °F(1 °C) after 7 hours.

TULO mode 3:
■ Set temperature will rise by 1 °F(1 °C) if the appliance operates in cooling mode for 1 hour, rise by 2°F(2°C) after 2 hours, then decrease by 2°F(2°C) after 6 hours, decrease by 1 °F(1 °C) after 7 hours.
■ Set temperature will decrease by 2°F(2°C) if the appliance operates in heating mode for 1 hour , decrease by 2°F(2°C) after 2 hours, then rise by 2°F(2°C) after 6 hours, rise by 2°F(2°C) after 7 hours.

TULO mode 4:
■ Set temperature will keeps steady.

Note: Heating is NOT available for cooling only air conditioner.
Note: Press SUPER ,SMART, MODE,SLEEP or FAN button cancel SLEEP mode.

IFEEL mode

In IFEEL mode, the temperature sensor built in remote controller is activated. It can sense its surrounding temperature, and transmit the signal back the unit, the unit can adjust the temperature so as to provide maximum comfort.

Note: When using /FEEL mode, advice to put the remote in the place where the indoor unit can receive the signal easily.
Note: When stopping the air conditioner, advice to cancel the /FEEL mode so as to save energy .

Zolemba / Zothandizira

innovair IA60002 Remote Control [pdf] Buku Logwiritsa Ntchito
IA60002 Remote Control, IA60002, Remote Control, Control

Kusiya ndemanga

Anu email sati lofalitsidwa. Amafuna minda amalembedwa *