Honeywell IPGSM-4G Single or Dual Path Commercial Fire Communicator Owner's Manual

The IPGSM-4G is a commercial fire alarm communicator that offers contact ID reporting with any Fire Alarm Control Panel (FACP) that has a built-in dialer. This single or dual path communicator connects directly to the primary and secondary communication ports of a fire panel’s Digital Alarm Communicator Transmitter (DACT). It offers three selectable reporting paths which include: Cellular only, IP only, or IP primary/cellular backup. All signals from the IPGSM 4G are delivered to Honeywell’s AlarmNet® Network Control Center, which routes highly encrypted Ethernet data packets via a customer provided internet connection or cellular network to the appropriate central station. The state of the art AlarmNet network control center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-I and 800 PLUS services, providing true redundancy and multi-path message delivery.
Alternative communication methods are critical in the marketplace due to VoIP (Voice over IP), migration from POTS (Plain Old Telephone Service) and growth of digital radio networks. The IPGSM-4G’s single path communications solution allows one technology to be used (either IP or cellular) to provide the appropriate connectivity to a central station. For added reliability, our exclusive dual path solution allows both technologies (IP and cellular) to be used together for maximum survivability or for local jurisdiction requirements that specify a dual technology system.

NKHANI & MABWINO

Imapulumutsa mtengo wama foni awiri odzipereka.
Single or dual path communications- (can communicate to central station using cellular technology, internet, or both.

Requires no change to the existing Fire Alarm Control Panel configuration. (Connects directly to the primary and secondary telephone ports of a DACT.)
Operates over the following communication protocols: HSPA+ (4G) HSPA (HSDPA & HSUPA) (3G), EDGE (2G GPRS) (2G).

Selectable reporting paths and supervision intervals to meet NFPA 72, chapter 26 requirements. (Compliant with NFPA 72 2010 and 2013 supervision requirements.)
Works over any type of customer provided Ethernet 10/100 based network connection (LAN or WAN), DSL modem or cable modem.

Deta imatumiza kudzera pa protocol yolumikizana ndi ID koma imakhala yotetezedwa ndi mulingo wapamwamba kwambiri wamakampani (AES 256 bit).
Supports both dynamic (DHCP) or Public and Private Static IP addressing.

Module Yopangira Mphamvu Yopangidwira: Mapangidwe amagetsi opangira ma board amakhala ndi batri yobwerera. Zimaphatikizapo kuyang'anira mphamvu zoyambirira ndi batri.
Ma LED ozindikira : Mphamvu zama siginecha ndi zizindikiro za mawonekedwe.

Kulumikizana kodalirika: Kulumikizana kwa IP ndi GSM kumayesedwa tsiku lililonse.
QOS: Quality of Service diagnostics via AlarmNet conveys vital communicator information including when message was received, signal strength, and message path used.

7720P Wogwiritsa ntchito pamanja kuti akhazikitse mosavuta.

The IPGSM-4G is designed to operate over the most common cellular networks, including 3G and HSPA+. Its multi-GSM platform technology automatically chooses the best available cellular signal in the area based on signal strength and seamlessly self-adjusts to maintain critical life safety communication. In addition, it connects to any type of customer provided Ethernet 10/100 base network connection (LAN or WAN), DSL model or cable modem. Our selectable reporting path feature allows the radio to be configured for a single or dual path solution as well as the appropriate supervision intervals based on NFPA 72 requirements. (See diagram below for selectable paths and supervision timing intervals.)

opaleshoni

When an event occurs, the Fire Alarm Control Panel goes off hook to dial the central station. The IPGSM-4G Dialer Capture Module detects the off-hook condition and provides the fire panel with a dial tone. When the fire panel detects the dial tone, it begins dialing the central station. After the dialing is completed, the Dialer Capture Module returns a handshake to the fire panel. The fire panel then sends the contact ID reports to the Dialer Capture Module, which in turn sends a kiss-off after the report is successfully received from the fire panel. The Dialer Capture Module sends the contact ID reports to the IPGSM communications module. When all the reports are sent, the fire panel goes on-hook. The IPGSM communications module then transmits the messages to the central station either over the GSM network or the Internet (dependent on configuration).

Ndondomeko Yosavuta

The IPGSM-4G communicator can be pre-programmed using the 7720P programmer to enter all central-station information. This is saved to the IPGSM-4G communicator panel memory. When the IPGSM-4G communicator is installed at the site and connected to the Internet/Intranet, it registers itself with the AlarmNet receiver.
Pamakhazikitsidwe ambiri, magawo ofunikira okha ndi awa:

ID Yoyambira Yamzinda (manambala awiri) yopezedwa kuchokera pamalo owonera.
ID ya Primary Central Station (manambala awiri) yopezedwa kuchokera pamalo anu owunikira.

ID Yolembetsa Yoyambira (manambala anayi) yopezedwa kuchokera pamalo anu owunikira.
ID ya MAC ya Communication Module, ndi nambala ya MAC CRC yomwe ili kunja kwa bokosi, komanso mkati mwa gawoli.

Magawo onsewa amaperekedwa ndi malo oyang'anira.
Zindikirani: Some assembly is required. See Installation and Setup Guide
#800-12454 for full details.

Fire Communicator Capability
The IPGSM-4G is compatible with fire panels that use the Contact ID communications format as described in the SIA DC-05 standard.

AlarmNet
Honeywell's AlarmNet wakhala mtsogoleri wa dziko lonse mu teknoloji yolankhulana ndi ma alarm kuyambira 1986. Njira yodalirika yotumizira zizindikiro za alamu, mawailesi athu a wailesi amapereka mauthenga ambiri ku United States ndi Canada. AlarmNet Network Control Center imayendetsa ma siginecha kuchokera ku maseva amphamvu m'malo angapo okhala ndi chithandizo cha 24/7. Netiweki ya AlarmNet imakhala ndi ma seva osafunikira, zosunga zobwezeretsera zotentha ndi majenereta okhala ndi zosunga zobwezeretsera m'malo onse kuti ntchito ipitirire. Zizindikiro zochokera ku Alarm-Net zimatumizidwa kwa olandila pa siteshoni yapakati pogwiritsa ntchito njira zingapo zolumikizirana ndi intaneti, ma wayilesi kapena ntchito yaulere ya POTS.

Zofunika Zokonzera

Kutsatira ul
To meet UL864/NFPA, ensure the following:

IPGSM-4G must be installed in accordance with NFPA (National Fire Protection Association) standards 70 and 72.
IPGSM-4G must be mounted in the same room and within 20 feet of the fire panel.

IPGSM-4G, and all equipment used for the IP connection (such as the router, hub, modem, etc.) shall be listed, must be powered from an un-switched branch circuit, and be provided with appropriate standby power.
IPGSM-4G must use the 7AH battery (not supplied) to provide 24-hour backup capability.

IPGSM-4G Technical Specifications

ZOSAYENELA
Thiransifoma:

Poyamba: 120VAC, 60Hz, 0.5A
Chachiwiri: 18VDC, 50VA

Battery:

One 12 V 7.0 AH lead-acid battery: (sichimaperekedwa)
Kuthamangitsidwa kwa batri: 1 Amp pazipita
Battery discharge current: Standby 230mA, Active 950mA

ZINTHU ZABWINO

Makulidwe: 14.875″ H x 12.75″ W x 3.0″ D (37.8 cm H x 32.4 cm W x 7.6 cm D)
mtundu; Red

SHIPPING SPECIFICATIONS

kulemera kwake: Mabala 5.3. (Makilogalamu 6.94)
Makulidwe: 15.625″ H x 13.79″ W x 9.25″ D (39.7 cm H x 34.9 cm W x 23.9 cm D)

KUCHERA NDI KUCHINENGA KWAMBIRI
Dongosololi limakwaniritsa zofunikira za NFPA kuti lizigwira ntchito pa 0 -49°C/32 – 120°F ndi pa chinyezi chachifupi 93% ± 2% RH (osatsika pa 32°C ± 2°C (90°F ± 3°F) Komabe, moyo wothandiza wa mabatire oyimilira a dongosololi ndi zida zamagetsi zitha kukhudzidwa kwambiri ndi kutentha kwambiri komanso chinyezi, chifukwa chake, tikulimbikitsidwa kuti dongosololi ndi zotumphukira zake ziziyikidwa m'malo omwe kutentha kwachipinda kumakhala 15 - 27°C/60 – 80°F.

PRODUCT LINE INFORMATION

IPGSM-4G: Internet and Digital Cellular Fire Alarm Communicator Panel. Includes red cabinet with Ademco® key and lock, wall outlet box, Dialer Capture Module, IGSM Communications Module, antenna & mounting adapter, PowerBoost1 power supply, LED display board, transformer, manual, & required screws, cables, etc.
Antenna External Hardware

GSM-ANT3DB: 3db gain external/remote antenna
WA7626-CA: SNA to N Adapter
Mtengo wa 7626-50HC 50 ft. antenna cable, low loss

Mtengo wa 7626-25HC 25 ft. antenna cable, low loss

Zindikirani: The GSM-ANT3DB and the WA7626-CA are both required for installing an external antenna along with the necessary cable needed (7626-50HC: 50 ft. or 7626-25HC: 25 ft.)
Zida Zina

7720P: IPGSM-4G hand held programmer.

HPTCOVER: Plug-in transformer box for IPGSM communicator.
BAT-1270: Battery 12 Volts, 7 AH, yosindikizidwa.

MANDAMBO WA AGENCY NDI ZOTHANDIZA
Zomwe zili m'munsizi ndi zovomerezeka zomwe zili m'munsizi zikugwira ntchito ku gulu loyankhulirana la IPGSM-4G. Nthawi zina, ma modules ena sangatchulidwe ndi mabungwe ena ovomerezeka, kapena mindandanda ikhoza kuchitika.
Funsani fakitale kuti mupeze mndandanda waposachedwa.

UL KutchulidwaS789
CSFM: 7300-1645: 0199
FDNY: COA #6219

Ademco® ndi AlarmNet® ndi zilembo za Honeywell International Inc.
Chikalatachi sichinagwiritsidwe ntchito poyika. Timayesetsa kusunga zinthu zathu zaposachedwa komanso zolondola. Sitingathe kuphimba mapulogalamu onse kapena kuyembekezera zofunikira zonse. Mafotokozedwe onse amatha kusintha popanda chidziwitso.

Kuti mudziwe zambiri
Learn more about Honeywell’s IPGSM-4G and other products available by visiting www.honeywellpower.com.
Honeywell Power Products
12 Clintonville Road
Northford, CT 06472-1610
877.HPP.POWR
www.mumpaw.com
firealarmresources.com

Zolemba / Zothandizira

Honeywell IPGSM-4G Single or Dual Path Commercial Fire Communicator [pdf] Buku la Mwini
IPGSM-4G Single or Dual Path Commercial Fire Communicator, IPGSM-4G, Single or Dual Path Commercial Fire Communicator, Single Path Commercial Fire Communicator, Dual Path Commercial Fire Communicator, Commercial Fire Communicator, Fire Communicator