Avhrit 2-in-1 Cordless Pole Saw & Mini Chainsaw

1. Malangizo Ofunika Otetezedwa

Werengani machenjezo onse okhudzana ndi chitetezo, malangizo, mafanizo, ndi mafotokozedwe operekedwa ndi chida chamagetsi ichi. Kulephera kutsatira malangizo onse omwe ali pansipa kungayambitse kugunda kwamagetsi, moto, ndi/kapena kuvulala koopsa. Sungani machenjezo onse ndi malangizo kuti mudzawagwiritse ntchito mtsogolo.

1.1 Zochenjeza Zachitetezo Pazida Zamagetsi Zonse

• Chitetezo cha Malo Ogwirira Ntchito: Sungani malo ogwirira ntchito aukhondo komanso owala bwino. Malo odzaza ndi zinthu kapena amdima amachititsa ngozi. Musagwiritse ntchito zida zamagetsi pamalo ophulika, monga pamene pali madzi, mpweya, kapena fumbi loyaka. Zida zamagetsi zimapanga nthunzi zomwe zingayatse fumbi kapena utsi.
• Chitetezo cha Magetsi: Pewani kukhudzana ndi thupi ndi zinthu zadothi kapena zozikika monga mapaipi, ma radiator, mtunda, ndi mafiriji. Pali chiopsezo chowonjezereka cha kugwedezeka kwa magetsi ngati thupi lanu lili ndi dothi kapena pansi.
• Chitetezo Chaumwini: Always wear eye protection. Use appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, non-slip safety shoes, hard hat, and heavy-duty gloves. Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Chainsaw Specific Safety: Always hold the chainsaw firmly with both hands. Ensure proper footing and balance. Do not overreach. Be aware of kickback potential. Never operate the chainsaw with one hand.

1.2 Kugwiritsa Ntchito ndi Kusamalira Chida Cha Battery

• Limbikitsaninso chojambulira chomwe wopanga adachipanga. Chaja chomwe chili choyenera mtundu umodzi wa batire pack chikhoza kuyambitsa ngozi yamoto chikagwiritsidwa ntchito ndi batire lina.
• Gwiritsani ntchito zida zamagetsi pokhapokha ndi mapaketi a batri osankhidwa. Kugwiritsa ntchito mapaketi ena aliwonse a batri kungapangitse ngozi yovulala ndi moto.
• Battery paketi ikapanda kugwiritsidwa ntchito, sungani kutali ndi zinthu zina zachitsulo, monga zokopa zamapepala, ndalama zachitsulo, makiyi, misomali, zomangira kapena zinthu zina zazing'ono zachitsulo, zomwe zimatha kulumikizana kuchokera ku terminal kupita kwina. Kufupikitsa mabatire pamodzi kungayambitse kuyaka kapena moto.

2. Zamkatimu Phukusi

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer service.

• Avhrit 8-inch Chainsaw x 1
• Upgraded Extension Pole x 1
• Chaja x 1
• 4000mAh Batteries x 2
• Chains (one installed, one spare) x 2
• Empty Oil Bottle x 1
• Gloves x 1
• Safety Goggles x 1
• Nkhope x1
• Zowononga x 1
• Guide Bar Protector x 1
• Buku Lachidziwitso x 1
• Chingwe cha Mapewa x 1

Figure 2.1: Complete package contents including the chainsaw, extension pole, batteries, charger, and accessories.

3. Zamalonda Zathaview

The Avhrit APS82 is a versatile 2-in-1 cordless tool designed for efficient tree cutting and branch trimming. It functions as both a compact mini chainsaw and an extendable pole saw, offering flexibility for various tasks.

3.1 Zofunika Kwambiri

• 2-in-1 Design: Easily switch between mini chainsaw and pole saw configurations without additional tools.
• Kufikira Kwawonjezedwa: The telescopic pole extends from 6 to 10 feet, allowing a reach of up to 15 feet for high branches.
• 8-Inch Guide Bar: Suitable for cutting small to medium branches.
• Mabatire Awiri Awiri 4000mAh: Provides extended runtime for prolonged use.
• 900W Brushless Motor: Delivers powerful and efficient cutting performance with a chain speed of 20 ft/s.
• Makina Opangira Mafuta: Ensures continuous chain lubrication for smoother cuts and reduced wear.
• Mapangidwe Opepuka: Ergonomic design for comfortable handling and reduced fatigue.

Figure 3.1: The Avhrit 2-in-1 Cordless Pole Saw and Mini Chainsaw in use.

Figure 3.2: Detail of the 900W Brushless Motor.

Figure 3.3: Dual 4000mAh Battery Endurance.

Figure 3.4: Smart Adjustments and Safety Features.

4. Kukhazikitsa

Proper setup is crucial for safe and efficient operation. Follow these steps carefully before first use.

4.1 Kuyitanitsa ndi Kuyika Battery

1. Charge both 4000mAh batteries fully using the provided charger. The charger indicator will show when charging is complete.
2. Align the battery pack with the battery slot on the chainsaw handle or the pole saw base.
3. Slide the battery into place until it clicks securely. Ensure it is fully seated.

4.2 Kukhazikitsa Unyolo ndi Mipiringidzo Yotsogolera

Refer to the 'Steps for Adjusting Chain' video for a visual guide on this process.

1. Loosen the nut on the side cover using the provided wrench and remove the side cover and baffle.
2. Carefully remove the existing chain and guide bar if they are installed.
3. Place the chain around the guide bar, ensuring the cutting teeth are facing the correct direction (away from the motor on the top edge).
4. Align the guide bar and chain assembly with the drive sprocket and the mounting studs on the chainsaw body.
5. Replace the housing cover, ensuring there is no gap when the guide plate is installed.
6. Install the nuts to fix the cover, but do not fully tighten them yet. A slightly loose space is required to adjust the chain tension.

4.3 Kusintha Kupsinjika kwa Unyolo

1. Pull the chain to expose 4-5 drive links for optimal fit.
2. Use the screwdriver to adjust the chain tensioning screw. Turn clockwise to tighten the chain until it is snug but can still be pulled freely around the guide bar by hand.
3. Once the tension is correct, fully tighten the nuts on the side cover with the wrench.

4.4 Adding Lubricating Oil

The chainsaw features an automatic oiling system. Ensure the oil tank is filled before each use.

1. Locate the oil tank cap on the chainsaw body.
2. Unscrew the cap and fill the tank with approximately 20ml of appropriate chainsaw lubricating oil using the provided oil bottle.
3. Bwezerani bwino kapu ya thanki yamafuta.

Figure 4.1: Filling the Automatic Oiling System.

4.5 Attaching/Detaching the Telescopic Pole

1. Kuphatikizira: Align the mini chainsaw module with the connector on the telescopic pole. Push firmly until it clicks into place. Engage the safety lock.
2. Kuchotsa: Disengage the safety lock and press the release button, then pull the mini chainsaw module away from the pole.
3. To Extend/Retract: Loosen the adjustment switch on the pole, extend or retract to the desired length (6 to 10 feet), and then tighten the switch to secure.

5. Malangizo Ogwiritsira Ntchito

Always wear appropriate personal protective equipment (PPE) including safety goggles, gloves, and hearing protection when operating the tool.

5.1 Starting and Stopping the Chainsaw

1. Ensure the battery is installed and fully charged, and the oil tank is filled.
2. To start, press and hold the safety switch, then squeeze the trigger switch.
3. Kuti muyime, masulani choyambitsa.

5.2 Using as a Mini Chainsaw

For ground-level tasks or cutting smaller pieces of wood.

• Gwirani chingwecho mwamphamvu ndi manja onse awiri.
• Place the guide bar against the material to be cut.
• Start the chainsaw and allow the chain to reach full speed before beginning the cut.
• Apply light, steady pressure. Let the saw do the work.

Figure 5.1: Using the Mini Chainsaw for trimming.

5.3 Using as a Pole Saw

For reaching high branches safely from the ground.

• Attach the mini chainsaw to the telescopic pole and extend it to the desired length.
• Adjust the cutting head angle for optimal reach and cutting position.
• Use the shoulder strap for better balance and reduced fatigue.
• Position the saw blade against the branch, ensuring a stable stance.
• Start the chainsaw and make the cut with controlled movements. Avoid cutting directly overhead.

Figure 5.2: Operating the Pole Saw for high branches.

6. Kusamalira

Regular maintenance ensures the longevity and optimal performance of your Avhrit chainsaw.

6.1 Mafuta a Chain

• The automatic oiling system will lubricate the chain during operation. Regularly check the oil level in the tank and refill as needed.
• Use only recommended chainsaw bar and chain oil.

6.2 Kunola ndi Kusintha Unyolo

• A dull chain will reduce cutting efficiency and increase strain on the motor. Sharpen the chain regularly or replace it with a new one when necessary.
• Refer to the 'Steps for Adjusting Chain' video (Video 4.1) for guidance on chain removal and installation.

6.3 Kuyeretsa ndi Kusunga

• After each use, remove the battery and clean the chainsaw and guide bar. Remove sawdust, chips, and debris from the chain, guide bar groove, and motor housing.
• Sungani chidacho pamalo owuma, otetezeka osafikirika ndi ana.
• Remove batteries from the tool during storage.

6.4 Kusamalira Battery

• Sungani mabatire pamalo ozizira, ouma kutali ndi kuwala kwa dzuwa komanso kutentha kwambiri.
• Musasunge mabatire ali m'malo otayidwa kwa nthawi yayitali. Muwadzazenso nthawi ndi nthawi ngati simukugwiritsa ntchito.

7. Mavuto

If you encounter issues with your chainsaw, refer to the following common problems and solutions:

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

Avhrit products are manufactured to high-quality standards. For warranty information, product support, or to purchase replacement parts, please refer to the contact information provided in your product packaging or visit the official Avhrit webmalo. Sungani risiti yanu yogulira ngati umboni wogula pazidziwitso zilizonse za chitsimikizo.