Thermex ID 50 V Shadow Smart Vertical Water Heater User Manual

1. Mawu Oyamba

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Thermex ID 50 V Shadow Smart vertical electric water heater. Please read these instructions thoroughly before installation and use, and retain them for future reference. This appliance is designed to provide hot water for domestic use.

2. Zambiri Zachitetezo

Zofunika: Installation, maintenance, and repair must be performed by qualified personnel in accordance with local regulations and standards. Failure to comply with these instructions may result in property damage, personal injury, or death.

• Ensure the electrical supply matches the specifications of the water heater (230V, 2000W).
• Chipangizocho chiyenera kukhazikika bwino.
• Osagwiritsa ntchito chotenthetsera chamadzi ngati chawonongeka kapena sichikuyenda bwino.
• Never block the pressure relief valve.
• Sungani zinthu zoyaka moto kutali ndi chotenthetsera chamadzi.
• Chotsani magetsi musanakonze kapena kuyeretsa.
• This appliance is equipped with frost protection. However, in areas prone to freezing, additional measures may be necessary if the appliance is not in continuous use.

3. Zamkatimu Phukusi

Onetsetsani kuti zipangizo zonse zilipo ndipo sizinawonongeke musanapitirize kukhazikitsa:

• Thermex ID 50 V Shadow Smart Electric Water Heater
• Chingwe chamagetsi chokhala ndi pulagi
• 3-in-1 Safety Group (includes drain valve, check valve, and pressure relief valve)
• Wall anchors (1 set)
• Buku Lachidziwitso (chikalata ichi)

4. Zamalonda Zathaview

The Thermex ID 50 V Shadow Smart water heater features a flat, vertical design with a black finish, making it suitable for various installations. It incorporates a digital display and intelligent control modes for efficient operation.

Chithunzi 1: Patsogolo view of the Thermex ID 50 V Shadow Smart water heater, displaying the digital control panel and water connections at the bottom.

Chithunzi 2: Mbali view kuwonetsa slim profile and vertical mounting bracket of the water heater.

Chithunzi 3: Kumbuyo view of the water heater, highlighting the secure mounting points.

Chithunzi 4: Tsatanetsatane view of the digital control panel, displaying temperature and operational modes.

Chithunzi 5: Pansi view showing the hot (red) and cold (blue) water connections.

5. Kukhazikitsa ndi Kuyika

Professional installation by a certified plumber and electrician is strongly recommended to ensure safety and compliance with all local codes.

5.1 Kukwera

• Select a suitable vertical wall location that can support the weight of the water heater when full (approx. 19 kg empty + 43 kg water = 62 kg).
• Ensure adequate clearance around the unit for maintenance and air circulation.
• Use the provided wall anchors to securely mount the water heater.

5.2 Kulumikiza kwa mapaipi

• Connect the cold water inlet (blue connection) to your main cold water supply.
• Install the 3-in-1 safety group on the cold water inlet line. This group includes a drain valve, check valve, and pressure relief valve. Ensure it is installed correctly to prevent backflow and overpressure.
• Connect the hot water outlet (red connection) to your hot water distribution system.
• Once connections are made, slowly open the cold water supply valve to fill the tank. Open a hot water tap in your home to allow air to escape until water flows steadily.
• Yang'anani maulalo onse ngati akutuluka.

5.3 Kulumikizitsa Magetsi

• Ensure the power supply is off at the main breaker before connecting the appliance.
• Connect the water heater's power cable to a dedicated, properly grounded electrical outlet.
• The electrical circuit should be protected by an appropriate circuit breaker (10 Amp analimbikitsa).

6. Malangizo Ogwiritsira Ntchito

6.1 Kuyatsa/Kuzimitsa

After successful installation and filling the tank with water, switch on the electrical supply. Press the 'On/Off' button on the control panel to activate the water heater.

6.2 Kuwongolera Kutentha

Use the 'Temperature control' up and down arrows on the control panel to set your desired water temperature. The current temperature will be displayed on the digital screen. The maximum temperature setting is 65 degrees Celsius.

6.3 Mitundu Yotentha

The water heater offers several heating modes, accessible via the 'Heating mode' button:

• Turbo: Provides rapid heating for quick hot water availability.
• Zokwanira: Balances heating speed and energy efficiency.
• Chuma: Prioritizes energy saving by heating water to a lower, but still comfortable, temperature.
• Wanzeru: Activates the intelligent learning function.

7. Smart Mode Functionality

The 'SMART' mode is designed to optimize energy consumption based on your hot water usage patterns. When activated, the water heater monitors your hot water consumption over a 7-day cycle. It then anticipates future demand, heating water only when needed. During periods of low demand, the water is maintained at a minimum temperature to save energy while ensuring comfort.

8. Kusamalira

Kusamalira nthawi zonse kumatsimikizira kukhala ndi moyo wautali komanso kugwira ntchito moyenera kwa chotenthetsera chanu chamadzi.

• Anode Inspection: The BIO-glasslined tanks are equipped with two anodes for enhanced corrosion protection. These anodes should be inspected and replaced by a qualified technician periodically, typically every 1-2 years, depending on water quality.
• Vuto Lothandizira Mpweya: Manually operate the pressure relief valve on the safety group at least once a year to ensure it is not blocked. Follow the manufacturer's instructions for the safety group.
• Kuchotsa Tanki: If the water heater will be out of use for an extended period or if there is a risk of freezing, drain the tank completely. Refer to the safety group instructions for draining procedures.
• Kuyeretsa: Tsukani kunja kwa chotenthetsera madzi ndi chofewa, damp nsalu. Osagwiritsa ntchito zotsukira abrasive kapena solvents.

9. Mavuto

The Thermex ID 50 V Shadow Smart features self-diagnosis capabilities. If an error occurs, a code may be displayed on the control panel. Refer to the specific error code table in the full manual (if provided separately) or contact customer support.

• Palibe Madzi Otentha: Check power supply, circuit breaker, and ensure the unit is turned on. Verify temperature setting.
• Madzi Otentha Osakwanira: Adjust temperature setting, check if 'Economy' mode is active, or if 'SMART' mode is still learning your usage patterns.
• Kutayikira: Immediately turn off water supply and power. Inspect connections. Contact a qualified plumber if the leak persists.
• Phokoso Lachilendo: This could indicate sediment buildup or other internal issues. Contact a qualified technician.

Pankhani ya mphamvu utage, the appliance will remember its last settings.

10. Mafotokozedwe aukadaulo

11. Chitsimikizo ndi Thandizo

Your Thermex ID 50 V Shadow Smart water heater comes with the following warranty:

• Appliance Warranty: zaka 2
• Tank Warranty: zaka 5
• Kupezeka kwa Zida Zosiyira: zaka 10

For warranty claims, technical support, or service, please contact your retailer or the authorized Thermex service center. Ensure you have your proof of purchase and the model number (ID 50 V Shadow) available.