Zathaview
The SEM Color Coat is a specialized elastomeric coating designed to restore or change the color of various surfaces, including most vinyl, flexible and rigid plastics, carpet, and velour. This product is formulated as a fade-resistant, flexible, and permanent coating, not a dye.
Chithunzi: Patsogolo view of the SEM Color Coat aerosol can, showing the product name, "Flexible Coating," and a graphic of a car interior.
Zambiri Zachitetezo
DANGER! EXTREMELY FLAMMABLE AEROSOL.
Causes skin irritation. Causes serious eye irritation. Harmful or fatal if swallowed. Vapor harmful. Read cautions on back panel.
- Khalani kutali ndi kutentha/kuyaka/moto wotseguka/malo otentha. Musasute.
- Chidebe chopanikizika: Osaboola kapena kuwotcha, ngakhale mutagwiritsa ntchito.
- Osapopera pa lawi lotseguka kapena gwero lina loyatsira.
- Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
- Tayani zomwe zili mkati / chotengera molingana ndi malamulo am'deralo/chigawo/dziko/padziko lonse lapansi.
- Pewani kupuma fumbi/fume/gasi/mist/nvapo/utsi.
- Sambani bwino mukagwira.
- Valani magolovesi oteteza / kuteteza maso / chitetezo kumaso.
- IF ON SKIN: Wash with plenty of water and soap. If skin irritation occurs, get medical advice/attention.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
- IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
Chithunzi: Kubwerera view of the SEM Color Coat aerosol can, displaying safety warnings and product information.
Kukhazikitsa ndi Kukonzekera
Proper preparation is crucial for optimal adhesion and longevity of the coating. Follow these steps carefully:
- Chotsani Zigawo: Disassemble and remove the parts you intend to paint from the vehicle or item.
- Kuyeretsa Mokwanira: Thoroughly clean the surfaces with soap and a degreaser to remove all dirt, grease, and contaminants.
- Light Sanding (Optional but Recommended): For improved adhesion, lightly sand the surface with 800-grit sandpaper.
- Kuyeretsa Komaliza: Clean the surface thoroughly again with acetone. This step is very important for proper adhesion. Wear rubber gloves and safety goggles during this step as acetone can burn through gloves and is irritating to eyes.
- Kutentha: Ensure the application temperature is approximately 21°C (70°F).
Chithunzi: Mbali view of the SEM Color Coat aerosol can, showing general application instructions and product details.
Malangizo Ogwiritsira Ntchito (Mapulogalamu)
Apply the SEM Color Coat in multiple thin layers, allowing adequate drying time between coats. Do not use a heat gun.
- First Coat (Light Dusting): Apply a very light dusting coat. Alternatively, apply an adhesion promoter if desired, which can help the paint adhere better to surfaces.
- Second Coat (Light Dusting): Apply another light dusting coat.
- Subsequent Coats (Coverage): Apply a third coat with more coverage, followed by a fourth and fifth coat for complete and even coverage.
- Nthawi Yoyanika: Allow 10-15 minutes in between coats. The exact drying time may vary depending on the ambient temperature.
The product is designed to be fast-drying, with a dry time of approximately 1 hour.
Chithunzi: Pamwamba view of the SEM Color Coat aerosol can, displaying the model number "15813" and color "Medium Dark Pewter" on the cap.
Kusamalira
Once applied and fully cured, SEM Color Coat provides a durable and flexible finish. To maintain the appearance and longevity of the coating:
- Clean coated surfaces with mild automotive interior cleaners.
- Avoid harsh abrasives or strong chemical solvents that could damage the finish.
- While the product is designed to be permanent and fade-resistant, prolonged exposure to extreme conditions may affect its lifespan.
Kusaka zolakwika
| Vuto | Chifukwa Chotheka | Yankho |
|---|---|---|
| Poor Adhesion / Chipping | Inadequate surface preparation (e.g., not cleaned thoroughly, no sanding). | Ensure surfaces are meticulously cleaned with degreaser and acetone. Consider light sanding. Apply an adhesion promoter. |
| Uneven Color / Streaks | Too thick coats, insufficient shaking of can, or inconsistent spray pattern. | Apply multiple thin, even coats. Shake can well before and during use. Maintain consistent distance from surface. |
| Mitundu Yosiyana | Incorrect color selection for the original surface. | Verify the correct color code for your application. Test on an inconspicuous area first. Note that "Medium Dark Pewter" may vary slightly depending on the original surface's specific shade. |
Zofotokozera
- Mtundu: Mtengo wa SEM
- Dzina lachitsanzo: 15813
- Mtundu: Medium Dark Pewter (Color Code: #665D56)
- Malizitsani Mtundu: Zachitsulo
- Kuchuluka kwa chinthu: 12 Fluid Ounces (12 oz / 340 g)
- Fomu yachinthu: Aerosol
- Mtundu wa utoto: Specialty Elastomeric Coating
- Kagwiritsidwe Mwapadera: Vinyl surfaces, flexible and rigid plastics, carpet, velour
- Malangizo Pamwamba: Carpet (also suitable for vinyl, plastic, velour)
- Kugwiritsa Ntchito M'nyumba / Panja: M'nyumba, Panja
- Zapadera: Kuyanika Mofulumira
- Dry Time: Pafupifupi ola limodzi
- Mulingo Wokanidwa ndi Madzi: Osamva Madzi
- Kulemera kwa chinthu: 1 paundi
- Makulidwe a Zamalonda: 8.38 x 5.63 x 7.88 mainchesi
- UPC: 646786158131
Zowonjezera Zowonjezera
For more detailed technical data and information, refer to the official SEM Color Coat Technical Data Sheet or RAP-1.
A relevant link for additional information can be found here: SEM Color Coat Technical Data
Chitsimikizo ndi Thandizo
Information regarding product warranty and direct support contacts is not available in this manual. Please refer to the product packaging or the manufacturer's official webtsamba lawebusayiti kuti mudziwe zambiri za chitsimikizo ndi njira zothandizira makasitomala.