I004775 Wi-Fi Smart Pan ndi Tilt Camera
Buku LophunzitsiraTsamba Loyambira Yoyambira
Wi-Fi Smart Pan&Tilt Camera
Model I004775
CHINSINSI: 43274604
Zamkatimu zili mkati
Kufotokozera
- Micro SD card slot (for local storage, max.128GB)
- Chizindikiro
- Lens kamera
- Reset: Press and hold the ‘reset’ for 5 seconds to reset the device
- Wokamba
- Power: Type-C USB (DC 5V/1A)
- Hole for wall hanging
- 1/4” Screw hole
Kukonzekera Kulumikiza
It is important that your phone is connected to a 2.4Ghz Wi-Fi and not to a 5GHz network.
To verify your mobile device is set to a 2.4Ghz Wi-Fi network, navigate to the Settings menu and click on Wi-Fi. In this menu you will see all the available networks in your area. Locate the SSID (the name of your network) and ensure that the Wi-Fi SSID does not end with a 5G / 5GHz.Check that you have a strong Wi-Fi signal (at least two bars) in the location where the smart camera is to be installed. 
Ngati mulibe mipiringidzo iwiri pa foni yanu, ndiye kuti mungafunike kuganiziranso kusamutsa kamera kumalo ena kapena kupeza Wi-Fi extender kuti muwonjezere mphamvu ya siginecha ya Wi-Fi.
Ikani Mirabella APP ndikulembetsa Akaunti
Kuti mupeze kamera yanu ndi ntchito zake, koperani "Mirabella Genio" APP ku smartphone yanu kuchokera ku App Store kapena Google Play ndikuwonjezera chipangizo chanu ku APP.
Ikani Micro SD khadi
Chonde dziwani kuti kamera idzagwira ntchito popanda khadi la SD, koma siidzatha kujambula footage.
Insert the Micro SD card gently into the SD card slot. Please pay attention to the direction of the Micro SD card. Do not force it inside. Micro SD card size needs to be between 8GB and 128Gb, FAT32 format only, This camera doesn’t support NTFS file dongosolo.
Kujambula kamera pogwiritsa ntchito Mirabella Genio App
- Power on the camera and wait for the indicator light to start blinking BLUE rapidly. (1 blink every second) if it fails to blink, Use the reset pin provided and insert into the reset port and hold until you hear an audible sound, the camera is now ready to pair.
- Onani kuti foni yanu yam'manja yalumikizidwa ndi netiweki ya 2.4Ghz Wi-Fi, (dzina la Wi-Fi lisathe ndi -5G).
- Tsegulani Mirabella Genio APP, dinani chizindikiro cha buluu "+", kenako sankhani chida chowonjezera, kenako sankhani Chitetezo & Sensor ndikusankha kamera yanu pamndandanda.
- Confirm that the LED indicator light is still blinking rapidly blue, tap “confirm Indicator is blinking BLUE rapidly”, then tap “next” and enter your home network 2.4GHz Wi-Fi name and password.
Tap next and the QR code will appear on your phone screen, place this QR code in front of the camera at approximate 15-20cm, until you hear a sound,Tap on “Beeped/ Indicator switched” It will then start to connect your device. (refer to the 1st & 2nd images).5. Once the countdown ends, the Camera has now successfully been paired to your APP. Please refer to the FAQ section for troubleshooting if this method does not connect.if somehow the QR code method does not work , please reset and retry using the EZ method.
FAQ
– A. Power off the camera, wait for 20 sec, depress the reset button until you hear a sound, then release the button, wait for another 30-40 sec until the light starts to blink blue rapidly again (1 blink every second).
– A. Please ensure camera is in the pairing mode, indicator light is blinking blue rapidly as per the APP screen, if you are unsure, please simply reset it.
– A. Please follow the Guest Network paring instructions at https://mirabellagenio.net.au/faqs
– A: Make sure the Wi-Fi network is a 2.4GHz network, device will not connect to a 5GHz network.Also make sure your Wi-Fi name has no space, your Wi-Fi network password is case sensitive, make sure you are entering it correctly.
– Refer to our webFAQ ya tsamba lanu ndikuwona rauta yanu Yalembedwa ngati ma routers ena amakhazikitsidwa mosiyana.
– A: There could be a temporary issue with your internet connection (e.g., service disruption). Please try again in a few minutes. Make sure your Wi-Fi router is turned On. Make sure the camera is getting a good signal from your Wi-Fi router.
– Use your phone to check range, it is recommended to have at least 2 signal bars showing proper connection.
A: Press and hold reset button (see Product Details section) until you hear an audible tone.
– A: Camera streaming issues may be caused by any of the following: Your phone’s cellular connection, which relies on mobile overage.Limited internet bandwidth at home, for exampLe, ntchito zina zotsatsira makanema zomwe zikuyenda nthawi imodzi pamanetiweki anu zitha kuyambitsa kuchulukana kuchedwetsa kutsitsa kwa intaneti ndi liwiro la kutsitsa.Kulandila kwa Wi-Fi sikungakhale kokhazikika kapena kugwira ntchito modalirika ngati mphamvu ya kamera ya Wi-Fi ili yosakwana 2 zitsulo. Mungafunike kukhazikitsa Wi-Fi repeater kapena extender kuti muwonjezere chizindikiro cha Wi-Fi.
– A: Make sure that the microSD card is installed correctly. To confirm the camera is recognizing the microSD card, go to storage Settings in the Settings menu and make sure the microSD
– Card capacity shows Total capacity, Used and Free space. If this does not appear you may consider reformatting the microSD card. WARNING:Reformatting micro SD card will delete all videos stored on card. Once SD card is formatted, your recordings will be stored on the card and can be accessed via the playback button.
– A: Once the microSD card reaches full capacity, new videos will start rewriting (deleting) over the oldest videos.
– A: Confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been enabled.
Momwe mungalumikizire kamera ku rauta ina
Pitani ku tsamba la zoikamo za kamera, yang'anani "chotsani chipangizo" Chotsani ndikukhazikitsanso kamera, phatikizaninso ndi rauta yatsopano kudzera mu pulogalamuyi.
Kusachita bwino, zimatenga nthawi yayitali kuti mulowetse foo wamoyotage
Chonde yang'anani chizindikiro cha Wi-Fi, ngati ili yosakwana 60%, muyenera kuganizira kusintha malo a kamera kapena kugula Wi-Fi extender kuti muwonjezere chizindikiro.
Kamera sinalumikizidwenso pa intaneti yokha
Pitani patsamba lokhazikitsira kamera, yang'anani "chotsani chipangizo" Chotsani ndikukhazikitsanso kamera ndikuyiphatikizanso kudzera mu pulogalamuyi.
Tsatirani ndondomeko yoyanjanitsa koma mumalandirabe cholakwika Sitikupeze Chipangizo
Zimitsani pamanja chizindikiro cha 5Ghz Wi-Fi pamakina a rauta.
Onetsetsani kuti chizindikiro cha 2.4Ghz Wi-Fi chayatsidwa.
Ensure the indicator light is blinking BLUE rapidly as per APP screen (1 blink per second)
Please check you have entered the correct 2.4Ghz Wi-Fi SSID and password.
Ndikugwiritsa ntchito Telstra NBN, ndinaletsa 5Ghz ndipo sindingathe kuyiphatikiza
Chonde tsatirani malangizo a Guest Network pa https://mirabellagenio.net.au/faqs If you have done all of the above, ensuring that 5Ghz is disabled.
Momwe mungayatse kapena kuzimitsa zidziwitso zamayendedwe
On the Genio APP home screen, Tap on Me -> Settings -> App Notification -> turn on/off Enable notifications.
Pa iphone, Zikhazikiko -> Zidziwitso -> yatsani/zimitsa Lolani Zidziwitso za pulogalamu ya Mirabella Genio.
Kuti mukhazikitse makamera angapo, sinthani kamera view or arrange device set up sequences and manage rooms.
On the genio APP home screen, tap on
on the top right corner, to access these options, tap on V to switch below rooms. Tap on x to exit this mode.
Mukufuna thandizo lina kapena mukufuna thandizo lina laukadaulo kuchokera kwa injiniya wa Mirabella
Pa zenera lakunyumba la genio APP, dinani, Ine, -> FAQ & Feedback -> Lipoti la vuto Lembani zolakwika kapena malingaliro a APP/chinthu, kenako perekani
Remember the performance of your Wi-Fi camera is relies heavily on the performance of your router
Ngati mukugwiritsa ntchito Telstra NBN kapena rauta yamagulu awiri, muyenera kuletsa 5GHz Wi-Fi kuti mulumikizane bwino komanso kuti mugwire bwino ntchito yonse, popeza ZOTHANDIZA ZAnzeru ku Australia zimangogwiritsa ntchito chizindikiro cha 2.4Ghz.
Zizindikiro zonse zimagwiritsidwa ntchito pazolinga zongoyerekeza.
Chopangidwa ku China
ANKO, HOME&CO NDI AUDIOSONIC® NDI ZIZINDIKIRO ZA KMART AUSTRLIA LIMITED.
MIRABELLA MAYIKO PTY LTD
1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043
KULIMBITSA KWAULERE: 1800 636 528
www.mirabellagenio.com.au
Zolemba / Zothandizira
 |
anko I004775 Wi-Fi Smart Pan and Tilt Camera [pdf] Wogwiritsa Ntchito I004775 Wi-Fi Smart Pan and Tilt Camera, I004775, Wi-Fi Smart Pan and Tilt Camera, Smart Pan and Tilt Camera, Pan and Tilt Camera, Tilt Camera, Camera |
Mirabella Genio - Smart Home 
