anko-LOGO

anko DP352 Full Length Hollywood Mirror

anko-DP352-Full-Length-Hollywood-Mirror-PRODUCT

machenjezo
Musanagwiritse ntchito chipangizochi, werengani ndi kutsatira machenjezo ndi malangizo onse omwe ali m'bukuli, ngakhale mukuchidziwa bwino. Chipangizochi sichinagwiritsidwe ntchito ndi anthu (kuphatikiza ana) omwe ali ndi mphamvu zochepa zakuthupi, zamaganizo kapena zamaganizo, kapena sadziwa zambiri komanso chidziwitso pokhapokha ngati atapatsidwa kuyang'anira kapena kulangizidwa pakugwiritsa ntchito chipangizocho ndi munthu yemwe ali ndi udindo wowateteza. Ana ayenera kuyang'aniridwa kuti awonetsetse kuti samasewera ndi chipangizocho.

Mayendedwe A Chitetezo

Chonde werengani buku lophunzitsira mosamala musanagwiritse ntchito koyamba. Ndibwino kuti musunge bukuli pophunzitsira mtsogolo.
CHOFUNIKA KUDZIWA: This product must be permanently fixed to the wall to help prevent toppling.

anko-DP352-Full-Length-Hollywood-Mirror-FIG-1

  • OSAGWIRITSA NTCHITO pamalo onyowa kapena onyowa.
  • OSAGWIRITSA NTCHITO kalirole popanda ma globe onse a LED.
  • OSATI kusunga kapena kugwiritsa ntchito chipangizochi pafupi ndi malo otentha kwambiri.
  • MUSAMAthamangitse chingwe chamagetsi chokhala ndi vacuum chotsukira, ndi zina.
  • DO NOT use if the appliance malfunctions, abnormal noise, smell, smoke, is dropped or damaged in any manner or any breakage is found during the operation.
  • Pofuna kuteteza magetsi, kukonza kulikonse kwa mankhwala kuyenera kuchitidwa ndi munthu wamagetsi woyenera yekha, kapena mankhwalawo ayenera kutayidwa.
  • MUSAMAgwiritse ntchito molakwika chingwe chamagetsi. Osakoka chipangizocho ndi chingwe kapena kuchikoka kuti chilumikize potulukira. M'malo mwake, gwirani mphamvu zamagetsi ndikuzikoka kuti musalumikizidwe.
  • OSAGWIRITSA NTCHITO ndi chingwe chowonongeka chamagetsi kapena magetsi.
  • OSATI kugwiritsira ntchito magetsi kapena galasi ndi manja onyowa.
  • DO Sungani chingwe chamagetsi kutali ndi malo otentha
  • DO kutulutsa magetsi kuchokera pamagetsi osagwiritsidwa ntchito,
  • OSATI kupachika zinthu pama globe a kuwala kwa LED.
  • MUSAMAyese kusintha izi mwanjira iliyonse.
  • DZIWANI kuti galasi lauma musanasinthe zoikamo.
  • GWIRITSANI ntchito pamalo owuma, apakati, amkati okha.
  • GWIRITSANI ntchito monga momwe tafotokozera m'bukuli.
  • DO use only the manufacturer’s replacement LED light Globes. Contact Customer service for spare LED Light Globes.
  • sungani chipangizo chanu m'nyumba pamalo ozizira ozizira.
  • DZIWANI kuti ana ndi makanda sangathe kusewera ndi matumba apulasitiki kapena zida zilizonse zopakira.
  • DO gwiritsani ntchito magetsi kuchokera ku gwero lamagetsi lomwelotage, mafupipafupi ndi mavoti monga akuwonetsera papepala lazindikiritso la mankhwala.
  • Ngati chipangizochi chikugwiritsidwa ntchito ndi wina, DO perekani buku la malangizo.
  • Palibe vuto lililonse lomwe lingalandiridwe pakuwonongeka kulikonse komwe kumachitika chifukwa chosatsatira malangizowa kapena kugwiritsa ntchito molakwika kapena kugwiritsa ntchito molakwika chida.
  • Izi sizinapangidwe kuti zigwiritsidwe ntchito zina kupatula zomwe zafotokozedwa m'buku lino.
  • ZOKHUDZA zokhazokha. Kugwiritsa ntchito mafakitale kapena malonda kumalepheretsa chitsimikizo.

Werengani ndikusunga Malangizo awa 

zigawo

anko-DP352-Full-Length-Hollywood-Mirror-FIG-2

1 kalilole 4 Power Supply – CW1203500AU
2 Kuwala kwa LED 5 Mphamvu mkati
3 On / Off Switch, Light Type Selector, and dimmer control. 6 4 Wall Plugs & Screws for wall mounting

Zindikirani: Mafotokozedwe ndi / kapena zida za chida ichi zimatha kusintha popanda kudziwiratu

LED Light Globe Assembly

  • Remove an LED light globe from its box and insert it into the light socket on the mirror.
  • Tembenukirani nyali ya LED mozungulira mozungulira kuti muyikemo kuwala. Ingolanini koma musakhwime.
  • Bwerezaninso ma globe ena onse a LED.
    Chonde dziwani kuti pali globe imodzi yowunikira ya LED yomwe yaperekedwa.

Malangizo a Wall Mount

CHOFUNIKA KUDZIWA: This product must be permanently fixed to the wall to help prevent toppling.anko-DP352-Full-Length-Hollywood-Mirror-FIG-2Ensure the wall you wish to hang the mirror on is suitable and strong enough for hanging / mounting heavy objects.

Chenjezo: The Mirror is heavy and weighs approximately 15Kg.
Chenjezo: Before drilling into the wall, ensure there are no electrical wires or water pipes, etc. directly behind where you are to drill.
If you are unsure DO NOT DRILL and seek the services of a professional to install the mirror.
If you are unsure about the capability of the wall to hold the mirror’s weight, seek the services of a professional to assess the wall.
If the wall material is thin, flimsy, cracking or brittle, do not mount the mirror to this wall.

Zida zimafunika

Tape Measure, Electric Drill, Philips Head Driver Bit for the electric drill, 3mm or 4mm drill bit, Pencil and a Philips hand screwdriver for screwing in the mounting screws.

  • Find a suitable strong wall and your desired location for the mirror near a power point.
  • On the back of the mirror, measure the distance between the two hanging slots across the top (approximate distance is 525mm) and the distance between the two hanging slots on the right from the top to the bottom (approximate distance is 1462mm) then mark the four positions on the wall.

CHOFUNIKA KUDZIWA: Use the measurements that you measure on your mirror as due to production tolerances, these distances may differ slightly.
Check that the diagonal dimensions are the same; this will ensure all four mounting screws are perfectly square to each other.
The following diagram is for reference only. 525mm Approx.anko-DP352-Full-Length-Hollywood-Mirror-FIG-4

  • If you are absolutely sure that behind the wall is clear of electrical wires, water pipes etc., drill a pilot hole using the 3mm or 4mm drill bit through the wall in all four places.
    Zindikirani: although the wall plugs are self-drilling, meaning that they will drill their own hole through the plaster wall, it is better to pre-drill the holes first to ensure the wall plugs follow these pilot holes ensuring they are in the exact position required as, without the pilot hole, the wall anchor may wander when drilling into the wall meaning the screws will not align with the slots in the back of the mirror.
  • Using the electric drill and the Philips screwdriver bit, position the tip of the wall anchor into the pilot hole you just drilled and then slowly screw the wall anchor all the way into the paster wall until the head of the wall anchor is flush with the wall surface.anko-DP352-Full-Length-Hollywood-Mirror-FIG-5CHOFUNIKA KUDZIWA: Do Not attempt to screw in any further as the plaster wall will crumble and the wall anchor will be useless for hanging.
  • Repeat for the other three wall plugs.
  • Using the Phillips hand screwdriver, screw in a mounting screw into the centre hole of each wall anchor leaving a gap of approximately 3 – 4mm between the underneath of the screw head and the wall surface.
    Zindikirani: Do Not screw all the way in as the screw heads need to be protruding for hanging the mirror on.anko-DP352-Full-Length-Hollywood-Mirror-FIG-6
  • Gently pick up the mirror and with the back of the mirror facing the wall, align the four screw heads with the centre of all four slots in the back of the mirror frame, push the mirror flush against the wall and then lower the mirror so that it hooks over the screw heads.anko-DP352-Full-Length-Hollywood-Mirror-FIG-7Zindikirani: You may need help from another person to do this part.
  • Please confirm the mirror is hanging securely on all screws before letting go of the mirror.

mphamvu Wonjezerani

zofunika: Gwiritsani ntchito ndi Power Supply Model: CW1203500AU (Zotulutsa: 12Vd.c. 3.5A)
Tsegulani chingwe chamagetsi.
Plug in the small plug on the end of the power supply cable into the power jack located in the side of the mirror.
Zindikirani: Depending on which way you have mounted the mirror, the power jack inlet may be on the left side of the mirror towards the top.
You can mount either way depending on your preference.
Lumikizani magetsi pamalo opangira magetsi ndikuyatsa.anko-DP352-Full-Length-Hollywood-Mirror-FIG-8Zindikirani: Zimitsani ndikuchotsa magetsi pamalopo pomwe simukugwiritsidwa ntchito.

Kugwiritsa Ntchito Mirror Lights

Yotsitsa / Yoletsa
With the power supply cable plugged into the side of the mirror and the power supply plugged into the power point and switched on, press (touch) and release the On / Off Switch button on the mirror front side.
Zindikirani: Depending on which way you have mounted the mirror, the On / Off Switch button may be on the left side of the mirror.
You can mount either way depending on your preference.

Mtundu Wowala

  • There are three types of light you can choose from Cool, Warm and Natural.
  • With the lights switched on, press (touch) and release the On / Off button on the front of the mirror again to select your desired light type.
  • Each press (touch) and release will cycle the light type from Cool to Warm to Natural and back around to Cool etc.

anko-DP352-Full-Length-Hollywood-Mirror-FIG-9

Zindikirani: If the Warm was selected and then you turn the light off, the next time you turn it on, the light type will change to Natural. Just cycle the light type around until you reach your desired setting.
Zindikirani: If during use or after changing a light globe, you notice the light globe colour is not the same as other light globes, you can reset the colours by turning off all the lights or unplugging the power supply for 30 seconds, then turn the lights back on and the lights will all reset to the same colour.

Kuwongolera Koyendetsa

  • The lights can be dimmed to your desired level whether the light type is set to Cool, Warm or Natural.
  • To dim, first, turn the lights on, then Press (touch) and HOLD, the On / Off button.
  • The lights will start to dim.
  • At any point when the light is at the dimmed level, you desire, lift your finger off the On / Off button.
  • the dim level reaches the lowest light setting, Press (touch) and HOLD, the On / Off button again and the light will brighten.

Kusamalira Mtumiki

Chenjezo: Zimitsani ndikumatula magetsi musanakonze kapena kuyeretsa.
LED M'malo Kuwala

  • Ngati mukufuna kusintha magetsi amtundu uliwonse wa LED, yambani kuzimitsa ndikuchotsa magetsi.
  • Gwirani pang'onopang'ono globe ya LED ndikuzungulira molunjika kuti mutulutse kuwala.
  • CHOFUNIKA KUDZIWA: Osamamatira chinthu chilichonse chakunja kapena chiwalo chathupi mu socket yowunikira ya LED chifukwa mutha kuvulaza munthu wanu kapena kuwononga chinthucho.
  • Lowetsani globe yatsopano yowunikira mu soketi yowunikira ndi kuzungulira koloko kuti muyikemo kuwalako. Kokanitsani koma musalimbitse.
  • ZINDIKIRANI: Replacement LED light globes can be purchased from HEG customer service. Refer to the Warranty page for the HEG customer service phone number.

LED Light Specification

  • LED Bulb: 20 x MAX 2.5W plus 1 spare globe
  • Anatsogolera Lamp Part No.: LED E14

Kukonza Galasi

  • Osayeretsa kalirole kapena mbali zina ndi petulo, zosungunulira kapena madzi aliwonse oyaka.
  • Osatsuka ndi zochapa, nsalu zopyapyala kapena zina zotere chifukwa pamwamba pake pawonongeka.
  • Gwiritsani ntchito nsalu yofewa kwambiri yowuma kuti mupukute galasi ndi mbali zina.
  • Osamiza galasi kapena mbali zina mumadzimadzi.

yosungirako

Ngati mukufuna kusunga galasi, sungani pamalo ozizira ozizira makamaka m'bokosi lake. Osapota chingwe chamagetsi mwamphamvu. Lunge momasuka.

Chitsimikizo Chosalakwa

12 Warth Monthy
Zikomo chifukwa chogula kuchokera ku Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law. Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect. Please retain your receipt as proof of purchase and contact our Customer Service Centre 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

ZOFUNIKA KWAMBIRI!
Pamafunso onse aukadaulo kapena zovuta pakugwiritsa ntchito malonda ndi zida zina zopumira, lemberani makasitomala a HE Group 1300 105 888 (Australia) ndi 09 8870 447 (New Zealand).

Zolemba / Zothandizira

anko DP352 Full Length Hollywood Mirror [pdf] Buku la Malangizo
DP352, Full Length Hollywood Mirror, Hollywood Mirror, Full Length Mirror, Mirror, DP352 Hollywood Mirror

Zothandizira

Kusiya ndemanga

Anu email sati lofalitsidwa. Amafuna minda amalembedwa *